Inhouse product
AN-UMG130/150 series comply with IEEE 802.3z/ab Gigabit Ethernet standard single fiber converter is designed with an optic wavelength Division Multiplexing (WDM technology that transports bi-directional full duplex signal over a single fiber simultaneously
Feature:
·
Complies with 1000Mbps NWay switches and 1000Mbps NICs
cost-effective for budget user
·
WDM – Wave Division Multiplexing Technology to cut your network
design costs – you need only 1 fiber instead of 2
·
Extends network span from 10km up to 40km over single fiber
·
MDI/MDI-X auto negotiation
·
WDM technology combines dual fiber cables into single fiber
greatly save the installation cost of expensive fiber cable
·
DIP switch allows LFP (Link
Loss Feature) on/off
·
DIP switch allows turn on/off Jumbo Frame support
·
Configurable Store/Forward modes
·
On/Off setting for Pass through mode
·
Smart pass through, Modified cut through modes set by dip
switches
·
FCC Class A & CE approved
·
RoHs Compliant
Specifications:
Wavelength: TX1310nm/RX1550nm; TX1550nm/RX1310nm, for high distance
TX1490nm/RX1550nm; TX1550nm/RX1490nm
Technical:
BER: <1E-8
Data Buffer: 128Kb
Power temperature variation: 0.2mw/℃
Input Power Range (dBm): 0~-40
Imax: 800mA
Power: 2.5 W
High perfomance ICPLUS IP113C or RTL8306G chipsets based
Fiber cable(m): 8.3/125, 8.7/125, 9/125 or
10/125single-mode, only 1 strand is needed
Maximum distance: 120 km (available ordering options
20/40/60/80/100/120 km)
Input power: IA@+5VDC or 110~260VAC or 48VDC
Dimensions: 95×70×26mm (external
power), 95×70×26mm (external power )
Environment:
Relative humidity;5% to 90%
Operating temperature: 0 to 70 degrees
Storage temperature : -20 to 7